PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN

PFC-2 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN

MATERIAL INTRODUCTION
PFC-2 is high-strength laminated material is made of solute phenolic resin containing homogenously dispersed graphite and high-quality cotton fiber and finally finished with heat solidifying process under certain pressure and temperature. This material is featured in its high mechanical strength, excellent abrasion resistance and excellent temperature resistance, ability to sustain strong vibration under semi-static state, ability to sustain impact loads and slight torque loads. It can work under conditions where oil is little or even with no oil at all. It is applied to the production of bushings for the pillars of hydraulic machines as well as guiding sleeves for the vertical pillars of forging presses and spherical bearings.
  • TYPICAL APPLICATION
  • TECHNICAL PARAMETERS
  • PRODUCT SPECIFICATIONS

01 Ball valves and butterfly valve bushings

02 Plastic mechanical guide sleeves

03 Bushings used in water conservative projects

04 Guide sleeves for the vertical pillar of hydraulic machineries and forging press

05 Bushings for the supporting frames of engineering machineries and pivot axles for vehicles

06 Marine engineering equipment spherical bearings and marine bearing materials


SpecificationColor

Density (g/ )

Tensile strength (MPa)

Compressive strength

Hardness HRM

Coefficient of friction

Temp (℃)

Parallel to the laminated plane

Vertical to the laminated plane

DryOil Lubrication
PFC-2Black1.2-1.4≥ 40≥160≥ 22090-1000.15-0.300.10-0.12-40~+130