PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN
PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN

PFC-1 HIGH-STRENGTH CLOTH-REINFORCED PHENOLIC RESIN

MATERIAL INTRODUCTION
PFC-1 is high-strength laminated material based upon the thermosetting phenolic resin and reinforced with high-quality cotton fiber and finally finished with heat solidifying process under certain pressure and temperature. This material is featured in its high load sustainability, excellent temperature resistance, abrasion resistance and excellent dimensional stability. It is applied to the production of guide rings of hydraulic cylinders, support rings, engineering machineries, bushings for the pivot axles for vehicles, thrust plates, guiding sleeves for the pillars of hydraulic machines, etc.
  • TYPICAL APPLICATION
  • TECHNICAL PARAMETERS
  • PRODUCT SPECIFICATIONS

Guide rings and support rings of hydraulic cylinders

Bushings for the pivot axles for vehicles and engineering machineries

Guiding sleeves for the vertical pillar of hydraulic machineries and forging press


SpecificationColor

Density

3(g/c

)

Tensile strength (MPa)

Compressive strength

Hardness HRM

Coefficient of friction

Temp

(℃)

Parallel to the laminated plane

Vertical to the

laminated plane

DryOil lubrication
PFC-1

Light yellow to brown

1.2-1.4≥45≥168≥256 920.23-0.460.12-0.14-40 ~ +130

Unit(mm)

 MaterialOuter diameter tolerance CDInternal diameter tolerance DWall thickness tolerance HWidth tolerance BThe outer diameter of the incision CDIncision GCut tolerance

PFC High-strength Cloth-reinforced Phenolic Resin

±0.1±0.100≤1002±1
>100~≤2003±1
-0.05-0.30>2004±1